The 11 Easy Steps of Felt Roofing Installation

The roof felt is a heavy responsibility protecting layer of fabric that’s infused with asphalt. This waterproof building materials sits between the roof sheathing and the ultimate layer of roofing materials.

In case you are a savvy DIYer, laying a felt roof is one thing you may undertake so long as you perceive the method and you don’t rush the job. The next is a set of simple steps for felt roofing set up:

1. Initially, determine the world the place you intend to put in the Roof Replacement and measure the world to learn the way a lot materials you’ll need. Please remember that that there are two kinds of felt roofing, the 15-pound in addition to the 30-pound. 15-pound felt is essentially the most generally used product within the business.

2. Subsequent, you must clear the roof deck effectively. Please guarantee that it’s free from any particles, particularly protruding nails and different objects that might injury the fabric.

3. Change any rotten or broken materials that you just discover on the roof deck.

4. Begin the felt roofing set up on the backside a part of one finish of the roof after which roll the felt lengthwise, in the direction of the decrease fringe of the roof.

5. Go away the decrease portion of the felt to overhand to about half of an inch to a few quarters of an inch, in order that any water from the roof can drip down as an alternative of gathering on the decking beneath it.

6. Nail the top of the roofing felt and maintain the roofing materials in place whilst you unroll the remainder of the felt roofing.

7. Safe the felt tightly on the opposite finish, however be sure to don’t rip it aside. You need to additionally guarantee that the felt roofing is flatly laid out.

8. The subsequent step is to nail the felt on the roof. Some rubber roofing contractors would recommend utilizing a simplex or any type of felting nails which have plastic caps.

9. Observe up with reducing the felt on the other ends and rolling the felt again to the other aspect whereas permitting about 4 inches of overlap from the primary layer.

10. Overlap the ridges of the roof to about one foot after which place the felt roofing materials in the identical approach that you just did with the other sides of the roofing felt.

11. Lastly, just be sure you cowl all of the nail heads with using roofing mastic in order for you them to remain there completely.


Leave a Reply

Your email address will not be published. Required fields are marked *